Learning Outcomes
We can classify acids by the number of protons per molecule that they can give up in a reaction. Acids such as HCl, HNO3, and HCN that contain one ionizable hydrogen atom in each molecule are called monoprotic acids. Their reactions with water are: [latex]\begin{array}{c}\text{HCl}\left(aq\right)+{\text{H}}_{2}\text{O}\left(l\right)\longrightarrow {\text{H}}_{3}{\text{O}}^{\text{+}}\left(aq\right)+{\text{Cl}}^{-}\left(aq\right)\\ {\text{HNO}}_{3}\left(aq\right)+{\text{H}}_{2}\text{O}\left(l\right)\longrightarrow {\text{H}}_{3}{\text{O}}^{\text{+}}\left(aq\right)+{\text{NO}}_{3}{}^{-}\left(aq\right)\\ \text{HCN}\left(aq\right)+{\text{H}}_{2}\text{O}\left(l\right)\leftrightharpoons {\text{H}}_{3}{\text{O}}^{\text{+}}\left(aq\right)+{\text{CN}}^{-}\left(aq\right)\end{array}[/latex] Even though it contains four hydrogen atoms, acetic acid, CH3CO2H, is also monoprotic because only the hydrogen atom from the carboxyl group (COOH) reacts with bases: Similarly, monoprotic bases are bases that will accept a single proton. Diprotic acids contain two ionizable hydrogen atoms per molecule; ionization of such acids occurs in two steps. The first ionization always takes place to a greater extent than the second ionization. For example, sulfuric acid, a strong acid, ionizes as follows: [latex]\begin{array}{lll} \text{First ionization: }{\text{H}}_{2}{\text{SO}}_{4}\left(aq\right)+{\text{H}}_{2}\text{O}\left(l\right)\rightleftharpoons {\text{H}}_{3}{\text{O}}^{\text{+}}\left(aq\right)+{\text{HSO}}_{4}{}^{-}\left(aq\right)&{}&{K}_{\text{a}1}=\text{more than }{10}^{2+}\text{; complete dissociation}\\ \text{Second ionization: }{\text{HSO}}_{4}{}^{-}\left(aq\right)+{\text{H}}_{2}\text{O}\left(l\right)\rightleftharpoons {\text{H}}_{3}{\text{O}}^{\text{+}}\left(aq\right)+{\text{SO}}_{4}{}^{2-}\left(aq\right)&{}&{K}_{\text{a}2}=1.2\times {10}^{-2}\end{array}[/latex] This stepwise ionization process occurs for all polyprotic acids. When we make a solution of a weak diprotic acid, we get a solution that contains a mixture of acids. Carbonic acid, H2CO3, is an example of a weak diprotic acid. The first ionization of carbonic acid yields hydronium ions and bicarbonate ions in small amounts. [latex]\text{First ionization: }{\text{H}}_{2}{\text{CO}}_{3}\left(aq\right)+{\text{H}}_{2}\text{O}\left(l\right)\rightleftharpoons {\text{H}}_{3}{\text{O}}^{\text{+}}\left(aq\right)+{\text{HCO}}_{3}{}^{-}\left(aq\right)\,\,\,\,\,\,\,\,\,\,\,\,{K}_{{\text{H}}_{2}{\text{CO}}_{3}}=\frac{\left[{\text{H}}_{3}{\text{O}}^{\text{+}}\right]\left[{\text{HCO}}_{3}{}^{-}\right]}{\left[{\text{H}}_{2}{\text{CO}}_{3}\right]}=4.3\times {10}^{-7}[/latex] The bicarbonate ion can also act as an acid. It ionizes and forms hydronium ions and carbonate ions in even smaller quantities. [latex]\text{Second ionization: }{\text{HCO}}_{3}{}^{-}\left(aq\right)+{\text{H}}_{2}\text{O}\left(l\right)\rightleftharpoons {\text{H}}_{3}{\text{O}}^{\text{+}}\left(aq\right)+{\text{CO}}_{3}{}^{2-}\left(aq\right)\,\,\,\,\,\,\,\,\,\,\,\,{K}_{{\text{HCO}}_{3}{}^{-}}=\frac{\left[{\text{H}}_{3}{\text{O}}^{\text{+}}\right]\left[{\text{CO}}_{3}{}^{2-}\right]}{\left[{\text{HCO}}_{3}{}^{-}\right]}=4.7\times {10}^{-11}[/latex] [latex]{K}_{{\text{H}}_{2}{\text{CO}}_{3}}[/latex] is larger than [latex]{K}_{{\text{HCO}}_{3}{}^{-}}[/latex] by a factor of 104, so H2CO3 is the dominant producer of hydronium ion in the solution. This means that little of the [latex]{\text{HCO}}_{3}{}^{-}[/latex] formed by the ionization of H2CO3 ionizes to give hydronium ions (and carbonate ions), and the concentrations of [latex]{\text{H}}_{3}{\text{O}}^{\text{+}}[/latex] and [latex]{\text{HCO}}_{3}{}^{-}[/latex] are practically equal in a pure aqueous solution of H2CO3. If the first ionization constant of a weak diprotic acid is larger than the second by a factor of at least 20, it is appropriate to treat the first ionization separately and calculate concentrations resulting from it before calculating concentrations of species resulting from subsequent ionization. This can simplify our work considerably because we can determine the concentration of [latex]{\text{H}}_{3}{\text{O}}^{\text{+}}[/latex] and the conjugate base from the first ionization, then determine the concentration of the conjugate base of the second ionization in a solution with concentrations determined by the first ionization.
When we buy soda water (carbonated water), we are buying a solution of carbon dioxide in water. The solution is acidic because CO2 reacts with water to form carbonic acid, H2CO3. What are [latex]\left[{\text{H}}_{3}{\text{O}}^{\text{+}}\right][/latex], [latex]\left[{\text{HCO}}_{3}{}^{-}\right][/latex], and [latex]\left[{\text{CO}}_{3}{}^{2-}\right][/latex] in a saturated solution of CO2 with an initial [H2CO3] = 0.033 M? [latex]{\text{H}}_{2}{\text{CO}}_{3}\left(aq\right)+{\text{H}}_{2}\text{O}\left(l\right)\rightleftharpoons {\text{H}}_{3}{\text{O}}^{\text{+}}\left(aq\right)+{\text{HCO}}_{3}{}^{-}\left(aq\right)\qquad{K}_{\text{a}1}=4.3\times {10}^{-7}[/latex] Check Your LearningThe concentration of H2S in a saturated aqueous solution at room temperature is approximately 0.1 M. Calculate [latex]\left[{\text{H}}_{3}{\text{O}}^{\text{+}}\right][/latex], [HS−], and [S2−] in the solution: [latex]\begin{array}{lll} {}{\text{H}}_{2}\text{S}\left(aq\right)+{\text{H}}_{2}\text{O}\left(l\right)\rightleftharpoons {\text{H}}_{3}{\text{O}}^{\text{+}}\left(aq\right)+{\text{HS}}^{-}\left(aq\right)&{}&{K}_{\text{a}1}=1.0\times {10}^{-7}\\{\text{HS}}^{-}\left(aq\right)+{\text{H}}_{2}\text{O}\left(l\right)\rightleftharpoons {\text{H}}_{3}{\text{O}}^{\text{+}}\left(aq\right)+{\text{S}}^{2-}\left(aq\right)&{}&{K}_{\text{a}2}=1.0\times {10}^{-19}\end{array}[/latex] A triprotic acid is an acid that has three dissociable H atoms. Phosphoric acid is a typical example: [latex]\begin{array}{l}\text{First ionization: }{\text{H}}_{3}{\text{PO}}_{4}\left(aq\right)+{\text{H}}_{2}\text{O}\left(l\right)\rightleftharpoons {\text{H}}_{3}{\text{O}}^{\text{+}}\left(aq\right)+{\text{H}}_{2}{\text{PO}}_{4}{}^{-}\left(aq\right)\qquad{K}_{\text{a}1}=7.5\times {10}^{-3}\\ \text{Second ionization: }{\text{H}}_{2}{\text{PO}}_{4}{}^{-}\left(aq\right)+{\text{H}}_{2}\text{O}\left(l\right)\rightleftharpoons {\text{H}}_{3}{\text{O}}^{\text{+}}\left(aq\right)+{\text{HPO}}_{4}{}^{2-}\left(aq\right)\qquad{K}_{\text{a}2}=6.3\times {10}^{-8}\\ \text{Third ionization: }{\text{HPO}}_{4}{}^{2-}\left(aq\right)+{\text{H}}_{2}\text{O}\left(l\right)\rightleftharpoons {\text{H}}_{3}{\text{O}}^{\text{+}}\left(aq\right)+{\text{PO}}_{4}{}^{3-}\left(aq\right)\qquad{K}_{\text{a}3}=3.6\times {10}^{-13}\end{array}[/latex] As with the diprotic acids, examples, each successive ionization reaction is less extensive than the former, reflected in decreasing values for the stepwise acid ionization constants. This is a general characteristic of polyprotic acids and successive ionization constants often differ by a factor of about 105 to 106. This set of three dissociation reactions may appear to make calculations of equilibrium concentrations in a solution of H3PO4 complicated. However, because the successive ionization constants differ by a factor of 105 to 106, the calculations can be broken down into a series of parts similar to those for diprotic acids. Polyprotic bases can accept more than one hydrogen ion in solution. The carbonate ion is an example of a diprotic base, since it can accept up to two protons. Solutions of alkali metal carbonates are quite alkaline, due to the reactions: [latex]{\text{H}}_{2}\text{O}\left(l\right)+{\text{CO}}_{3}{}^{2-}\left(aq\right)\rightleftharpoons {\text{HCO}}_{3}{}^{-}\left(aq\right)+{\text{OH}}^{-}\left(aq\right)\qquad{K}_{\text{b}1}=2.1\times{10}^{-4}[/latex] [latex]{\text{H}}_{2}\text{O}\left(l\right)+{\text{HCO}}_{3}{}^{-}\left(aq\right)\rightleftharpoons {\text{H}}_{2}{\text{CO}}_{3}\left(aq\right)+{\text{OH}}^{-}\left(aq\right)\qquad{K}_{\text{b}2}=2.3\times{10}^{-8}[/latex] You can view the transcript for “Acids and Bases, pH and pOH” here (opens in new window).
An acid that contains more than one ionizable proton is a polyprotic acid. These acids undergo stepwise ionization reactions involving the transfer of single protons. The ionization constants for polyprotic acids decrease with each subsequent step; these decreases typically are large enough to permit simple equilibrium calculations that treat each step separately.
Show Solution to Question 2 Glossarydiprotic acid: acid containing two ionizable hydrogen atoms per molecule. A diprotic acid ionizes in two steps diprotic base: base capable of accepting two protons. The protons are accepted in two steps monoprotic acid: acid containing one ionizable hydrogen atom per molecule stepwise ionization: process in which an acid is ionized by losing protons sequentially triprotic acid: acid that contains three ionizable hydrogen atoms per molecule; ionization of triprotic acids occurs in three steps |